| Customization: | Available |
|---|---|
| Transport Package: | Nude |
| Specification: | 100 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Highlights
1. Full rotation automatic follow function of spreader;
2. With advanced active inverter technology, the kinetic energy and potential energy stored in the machine can be converted into electric energy, which can be fed back to the power grid efficiently;
3. Restrain the pollution of high-order harmonic to the power grid, improve the power factor of the whole machine;
4. Record all the parameters of the action in one or more working cycles, optimize the calculation of the harness and the acceleration and deceleration time, so as to realize the automatic circulation of the grab;
5. According to different actions, calculate the acceleration of lifting point, set up subsection protection, find out the stall trend in advance, combine with hardware overspeed switch, realize double protection, effectively prevent the occurrence of stall accident;
6. When the spreader is lifted to the limited height, the control relay will alarm the buzzer on the control box, and the lifting action will stop at the same time. Only the lowering operation can be carried out, so as to prevent the lifting hook from over rolling.
Technical Parameters
* Lifting capacity of hook: 40t
* Lifting capacity of Grab: 40t
* Working range: 12-40m; Base distance: 12m
* Track gauge: 12M, turning radius: ≤ 9
* Lifting height: rail hook: 30m
* Lifting height: Rail Grab: 20m
* Lifting height: under rail hook / Grab: 20m
* Wheel pressure: 350kn
* Lifting speed of hook: 30m / min
* Lifting speed of Grab: 50M / min
* Walking speed: 26m / min
* Turning speed: 1.2m/min
* Luffing speed: 50M / min
40t-45m gantry crane is used on the quayside gantry crane track of branch, equipped with hook and grab, which can be used for loading and unloading heavy and bulk cargo. It is a multi-purpose gantry crane that can be used for loading and unloading with hook or grab. The crane is manufactured with domestic advanced technology, with reasonable structure layout, flexible and accurate mechanism action, safe and reliable use, convenient maintenance, etc.
The crane can be used for lifting, luffing, 360 ° rotation and the whole machine can walk along the track. The hoisting mechanism, luffing mechanism and rotating mechanism are working mechanism, and the walking mechanism is non working mechanism.
The Crane Has The Following Characteristics
1. The hoisting mechanism is composed of two sets of double drum, and the drum is welded with steel plate. The two sets of double drum can be operated synchronously when using the hook, and can also be opened and closed and lifted when using the grab. The hoisting reducer and drum shall be designed according to the same service life of the hoisting mechanism.
2. The luffing mechanism is rack and pinion driven. The rotating mechanism adopts three rows of roller slewing bearing, vertical planetary reducer drive, foot frequency variable force brake and limit torque coupling.
3. The traveling mechanism is composed of four groups of traveling trolley. Each traveling trolley is hinged with the balance beam and its gantry to balance the force. Three in one driving and electric wheel clamping device are used for braking; wind proof cable is arranged outside the door leg. A set of hinge points which can rotate 90 ° horizontally shall be set at each support leg (it shall be fastened with bolts during operation and cannot rotate). A device that can lift the whole machine is set at a proper position of each door leg.
4. 40t-45m four-bar gantry crane adopts rigid four-bar balance weight boom system. The column of plate beam structure is welded with the rotary table. The upper part of the gantry is a cylinder structure, and the connection between the upper part of the cylinder structure and the slewing ring is welded - the processed rolled thick flange can reduce the stress concentration at the connection. High strength bolts are used to connect the slewing ring with the thick flange on the rotary table and cylinder respectively, and proper preload is applied to the bolt connection to ensure the connection quality. The lower part of the gantry is a closed box structure.
Standards and Specifications
The crane is designed, manufactured, installed and commissioned in accordance with the latest version of the following standard specifications.
Code for design of cranes (GB / t3811-2008)
Gb6067-2010 safety regulations for hoisting machinery
Gb5905-2011 hoisting machinery test specifications and procedures
Jtj244-95 quality inspection and evaluation standard for port equipment installation engineering
JT / t99-94 Port Portal Crane test method
Note: in the adopted standards and specifications, those not specified in the Chinese standards shall be implemented in accordance with the corresponding international standards and specifications; imported parts shall be in accordance with the international standards, and domestic parts shall be in accordance with the Chinese standards.
Main Technical Parameters
Design conditions of crane working site
Crane gauge: 10.5m
Rail model: qu100
Crane wheel pressure: ≤ 300KN
Woking range: 12.5m ~ 45m rated lifting capacity: 40t
Woring range: 12.5m ~ 30m rated lifting capacity: 50t
3. Stability of crane
The overall stability of the crane shall be designed and checked in accordance with the relevant provisions of the FEM standard to ensure that the gantry crane has sufficient overall stability under the working state (wind speed 25m / s) and non working state (anchoring state, wind speed 55m / s), in accordance with the provisions of GB / t3811-2008.
Design Requirements, Materials and ManufacturingProcess
1. Design Requirements
The Seller shall provide a complete set of project management procedures, including the design, manufacturing and quality assurance procedures of all components and the whole project. Engineering procedures shall show the details of work division and reflect the key work procedures.
The Seller shall submit all copies of ISO series identification certificate of manufacturing equipment, and the winning gantry crane will carry out structural processing, manufacturing, installation and test on these equipment. The same applies to subcontractors.
Steel Structure
1. General requirements
The steel structure of the crane meets the requirements of strength, rigidity, stability and convenience for manufacturing and maintenance. The whole component is smooth in line, with clear stress, to avoid or reduce the impact of stress concentration as much as possible, and has sufficient fatigue strength. The calculation meets the FEM standard and China crane safety code (gb6067-2010). All the diagonal bars and braces have beautiful appearance, small wind resistance and are not easy to occur Wind vibration, easy to repair, maintenance, rust removal and paint advantages. All places requiring inspection and maintenance shall be provided with inspection holes, inspection channels and maintenance work platforms, and water leakage holes shall be provided at all places where water may accumulate to drain the water. A sealed manhole for inspection shall be set on the main box components, and the manhole cover shall be equipped with a sealing ring and fixed with bolts. For the box components that do not need to enter, they shall be sealed by welding and air tight test shall be conducted to meet the requirements of national standards.
2. boom and gantry
Boom and gantry are the main load-bearing components of gantry crane, which should have sufficient strength and rigidity. The boom of 40t-45m gantry crane adopts rigid pull rod combination. The appropriate position of the boom is provided with a steel wire rope wear reduction block to prevent the interference between the steel wire rope and the boom and facilitate the replacement of the steel wire rope. Each hinge point of boom system is connected by ball bearing. Hinge point design and pulley arrangement are convenient for maintenance and disassembly. Steel plate welded box structure is adopted for the main stressed components of boom and gantry. The gantry is a cylindrical gantry, the upper part is equipped with a large gear ring oil pan, the lower part is a rigid box structure leg, which is connected with the traveling trolley, and the clearance height of the lower part of the gantry is not less than 6m.
Contact Details:
Sales Engineer: Jim Leahy
Mob: 0086 150 2651 9060 (Whastapp, Wechat)
Skype: tszljs / Wechat: tszljswx
Email: [email protected] Web: cnthhi-crane.en.made-in-china.com
Add: No.82 North LuZhong Road, Yangshan Town, Huishan District, Wuxi, Jiangsu, China.
THHI Business Scope of Supply:
1. Marine Crane: Offshore Platform Crane, Hose Handling Crane, Deck Crane (Fixed Boom, Telescopic boom, Knuckle Boom).
2. Port Crane: Mobile Harbor Crane, Port Fixed Crane, Port Travelling Crane, Ship to Shore Crane.
3. Grab: Remote Control Grab, Hydraulic Grab, Ropes Mechanical Grab.
4. Eco-Hopper: Fixed Hopper, Travelling Hopper, Dust-proof Hopper, Eco-Hopper.
5. Spreaders: Auto-lock Spreader, Electric Spreader, Hydraulic Telescopic Spreader.
6. Ship Loader &Unloader: Screw Type, Bagging Type, Grab Type.
7. Other Bulk &Container Cargo Handling Equipment.
Contact our Sales &Get the Price with details Specifcation:
){kind=link}