Scissors Type Bucket Grab Simple Structure
Scissors grab is scissors structure which is connected by main hinge, and scoop is connected by scissors beam, simple structure. There will be pulley, strengthening beam and tube installed on beam. Support chain is fixed on strengthening tube to connect with upper beam to lift the whole grab. The open and close of scissors beam is controlled by shaft rotation of center hinge under action of wire rope winding system.
Usage of Scissors Type Bucket
Scissors grab type is a new type of grab device for bulk cargo. It has the characteristics of high efficiency, easy operation, good process performance and so on. Because the grasping curve tends to be horizontal and the covering area is large, it can be used for the rake set grab for clearance. In the end stage near the closure, the grasping margin is the largest, so it is the most advantageous to grab materials with high density such as ore.
Working Principle
Two open and close wire ropes and two support wire ropes respectively operate to complete the whole motion process of the grab. Four arm rods are divided into two groups, into a cross shape connected to the bucket part, so called shear grab. When working, the support wire rope will grab to the appropriate position, and then put down the open and close wire rope, with the center axis as the fulcrum and the weight of the bucket, the bucket will open, fall on the loose accumulation of the grab, the open and close wire rope, so that the two palate plate closed, complete the process of grabbing material. Due to the principle of lever and the weight of the grab, so the grab distance is relatively large.
THHI provides:
- Designs to customer specification, including volume and weight.
- Fast spare-parts delivery across the world.
- Acceptance testing including certification such as BV, LRS, GL, ABS, and etc.
Our advantage:
- As a leading manufacturer of 5000 square feet dedicated, licensed and certificated staff.
- Mechanical and machinery design, structural design and analysis dynamic modeling and seismic, failure modes and effects analysis Auto CAD, 3DMax, Math CAD, Solid Works, ANSYS and SAP2000 Advanced.
- All Main parts using reliable original imported brand.
Our Certificates:
THHI provide the SGS, CCS, BV, CE, ABS, ISO9000:2008, ISO14001:2004, OHSAS and etc certifications, also accept third party inspection, such as SGS Factory test etc.
What the CCS, BV, CE, ABS, certificates indicates:
- All the product design drawing and calculation is reasonable and meet the international standard, all the productions drawing and calculation will be audit before production.
- The welding meet the international standards, and no damage detection reports are required.
- On the testing the actual lifting capacity is 1.25 times than the rated lifting capacity and will issued exactly testing report according to the technical agreements.
FAQ:
Q1: What's the information should I provide when inquiry?
A: Thanks for your question. The more information you provide, the more accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
Q2: Is your products customized?
A: Yes, because of the different working condition, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!
Q3: How can we install the crane?
A: Our senior engineer can be your side to provide the installation guide service and training. Moreover, our best sales can visit your country.
Q4: Can you provide the serious lifting tools?
A: Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
Q5: How about your payment terms?
A: we accept T/T and L/C at sight.
Audited Supplier 
){kind=link}
){kind=link}